GE DEH-211 manual Installing the Software, CIMPLICITY PMCS Read-This-Book-First

9.If you did not select “PMCS with EPM 7700 Components” in the Setup Type dialog box (Step 7) or if you selected “Primary Node Installation” in Step 8, skip this step and proceed to Step 11.

If you selected Secondary Node installation in Step 8, the following dialog box appears prompting you to select either "Full Station" or "Stationless" node installation. If you are installing software on a computer that will service EPM 7700, EPM 7600 or EPM 7500 IEDs directly, choose "Full Station". If you are installing software on a computer that will not be connected to IEDs but will be used to access data from other network workstations, choose "Stationless". For more details on EPM 7700 network configuration, refer to the EPM Device Special Considerations section later in this manual, or to DEH-40035, the GE 7700 Gateway User’s Guide.

28 • Installing the Software CIMPLICITY PMCS Read-This-Book-First