GE DEH-211 manual Installing the Software, Computer Preparation, Installing CIMPLICITY

Installing the Software

Computer Preparation

PMCS must be installed on a PC running Windows NT Workstation 4.0. This host PC must be dedicated to the PMCS system. Performance and data integrity cannot be predicted unless the PC is configured solely for the purpose of running PMCS.

The Windows NT System control panel offers a Performance tab that allows you to boost performance for the foreground application. For PMCS, must be changed to No Performance Boost for Foreground Application (default is Maximum), as shown below:

The Virtual Memory setting may be left at the Windows NT defaults.

Make sure your system meets these requirements before proceeding with the remaining installation steps. PMCS will not run correctly unless these requirements are satisfied.

Installing CIMPLICITY

If CIMPLICITY HMI was provided with your PMCS software, you must install it before proceeding. If your computer already has CIMPLICITY HMI installed, make sure the following requirements are met.

14 • Installing the Software CIMPLICITY PMCS Read-This-Book-First