GE DEH-211 manual View Node

Ethernet Gateway	COM	Modbus RTU
IP Address	port	Address	Device Type	Device (Topic) Name
10.47.28.201	1	2	MODCONC	MC1
10.47.28.201	1	12	E3720	Main_Meter
10.47.28.201	1	33	PLEPM	Mfg_Meter
10.47.28.201	1	61	PLEPM	Plating_Meter
10.47.28.201	2	12	MODCONC	MC2
10.47.28.201	2	66	PLEPM	Office1_Meter
10.47.28.201	2	80	PLM	Office2_Meter
10.47.28.201	2	90	MDP	Feeder1_Relay
10.47.28.201	2	100	MVT	Mfg_Breaker
10.47.28.201	3	200	ML269	Mill_Relay
10.47.28.201	4	21	MODCONC	MC3
10.47.28.201	4	201	MVT	Plating_Breaker
10.47.28.201	4	210	MVT	Office_Breaker

View Node

You should configure View Nodes after you have configured and tested the Host PC to ensure all functions are operating. View Nodes require a copy of the network architecture list used above. Refer to GEH-6510, Network and Device Configurator, for complete configuration instructions.

46 • Configuring the Software CIMPLICITY PMCS Read-This-Book-First