Cleaning the glass cooktop.

ge.com

Safety

Clean your cooktop after each spill. Use CERAMA BRYTE® Ceramic Cooktop Cleaner.

Normal Daily Use Cleaning

ONLY use CERAMA BRYTE® Ceramic Cooktop Cleaner on the glass cooktop. Other creams may not be as effective.

To maintain and protect the surface of your glass cooktop, follow these steps:

Before using the cooktop for the first time, clean it with CERAMA BRYTE® Ceramic Cooktop Cleaner. This helps protect the top and makes cleanup easier.

Daily use of CERAMA BRYTE® Ceramic Cooktop Cleaner will help keep the cooktop looking new.

Shake the cleaning cream well. Apply a few drops of CERAMA BRYTE® Ceramic Cooktop Cleaner directly to the cooktop.

Use a paper towel or CERAMA BRYTE® Cleaning Pad for Ceramic Cooktops to clean the entire cooktop surface.

Use a dry cloth or paper towel to remove all cleaning residue. No need to rinse.

NOTE: It is very important that you DO NOT heat the cooktop until it has been cleaned thoroughly.

Instructions Operating Instructions

Use a CERAMA BRYTE® Cleaning Pad for Ceramic Cooktops.

Burned-On Residue

WARNING: DAMAGE to your glass surface may occur if you use scrub pads other than those recommended.

Allow the cooktop to cool.

Spread a few drops of CERAMA BRYTE® Ceramic Cooktop Cleaner on the entire burned residue area.

Using the included CERAMA BRYTE® Cleaning Pad for Ceramic Cooktops, rub the residue area, applying pressure as needed.

If any residue remains, repeat the steps listed above as needed.

For additional protection, after all residue has been removed, polish the entire surface with CERAMA BRYTE® Ceramic Cooktop Cleaner and a paper towel.

Care and Cleaning

The CERAMA BRYTE® Ceramic Cooktop Scraper and all recommended supplies are available through our Parts Center. See instructions under “To Order Parts” section on next page.

NOTE: Do not use a dull or nicked blade.

Heavy, Burned-On Residue

Allow the cooktop to cool.

Use a single-edge razor blade scraper at approximately a 45° angle against the glass surface and scrape the soil. It will be necessary to apply pressure to the razor scraper in order to remove the residue.

After scraping with the razor scraper, spread a few drops of CERAMA BRYTE® Ceramic Cooktop Cleaner on the entire burned residue area. Use the CERAMA BRYTE® Cleaning Pad to remove any remaining residue.

For additional protection, after all residue has been removed, polish the entire surface with CERAMA BRYTE® Ceramic Cooktop Cleaner and a paper towel.

Troubleshooting Tips Consumer Support

27

Page 27
Image 27
GE EER3000 owner manual Cleaning the glass cooktop, Normal Daily Use Cleaning, Heavy, Burned-On Residue

EER3000 specifications

The GE EER3000 is a cutting-edge energy-efficient equipment that redefines the landscape of modern electrical devices. Designed for both residential and commercial applications, this innovative unit provides top-tier performance, reliability, and environmental responsibility. At the heart of the EER3000 is its advanced energy efficiency rating, which significantly reduces energy consumption compared to traditional models, culminating in lower electricity bills and a reduced carbon footprint.

One of the standout features of the EER3000 is its intelligent energy management system. This technology utilizes real-time data to optimize energy usage, adjusting performance based on actual demand. Such adaptive capabilities not only enhance efficiency but also prolong the equipment's lifespan by minimizing wear and tear during idle periods.

In terms of connectivity, the EER3000 is equipped with Wi-Fi-enabled smart technology, allowing users to control and monitor the unit remotely through a dedicated mobile app. This feature provides convenience and peace of mind, enabling users to adjust settings and schedule operations from anywhere. Additionally, the integration with smart home systems means the EER3000 can be part of a larger ecosystem that includes other connected devices.

The EER3000 is designed with an emphasis on user safety and ease of operation. It comes with a user-friendly interface, complete with clear displays and straightforward controls, making it accessible for all consumers regardless of their technical expertise. Safety features include over-current protection, automatic shut-off mechanisms, and advanced surge protection to safeguard against unexpected power fluctuations.

Another notable characteristic of the GE EER3000 is its quiet operation. Utilizing noise-reducing technologies, this equipment can function at lower decibel levels, making it ideal for environments where noise might be a concern, such as hospitals or residential areas.

The construction of the EER3000 also reflects durability and resilience. Built with high-quality materials, the unit is designed to withstand varying environmental conditions, ensuring longevity and consistent performance over time.

Overall, the GE EER3000 represents a significant leap forward in energy-efficient technology, combining smart features, robust safety protocols, and quiet operation to meet the needs of today's eco-conscious consumers. Whether for home or business, the EER3000 stands as a testament to GE’s commitment to innovation and sustainability, making it a wise choice for a responsible future.