GE Feb-74 manual Press the Flash button on the handset or

INSERTING A PAUSE IN THE DIALING
SEQUENCE
Press the FLASH button (on the handset or	FLASH
PAUSE/VIP on the base) to insert a delay in the
dialing sequence when storing a phone num-
ber. A delay is sometimes needed to wait for a
dial tone. For example, after you dial 9 for an
outside line or to wait for a computer access
tone. Each pause counts as 1 digit in the
dialing sequence.

VERY IMPORTANT: If you make test calls to emergency numbers stored in memory, remain on the line and briefly explain the reason for the call to the dispatcher. Also, it is a good idea to make these calls in off-peak hours, such as early morning or late evening.

CHANGING A STORED NUMBER

Use the same procedure to change a stored number as you do to store a number—in a sense, you are just reassigning the memory location.

PHONE

DIALING A STORED NUMBER

1.Make sure the phone is ON by pressing the PHONE or SPEAKER button.

2.Press MEMORY

3.Press the number (0-9) for the desired memory location.

MEMORY

CALL BACK

23