GEH-5304A

Direct Current Motors and Generators

Type CD

Frames 2512AT, 2513AT, 2812AT, 2813AT

I.INTRODUCTION

This instruction book covers the CD2512AT-CD2813AT line of DC motors and generators.

High voltage and rotating parts can cause serious or fatal injury. The use of electric machinery, like all other utilization of concentrated power and rotating equipment, can be hazardous. Installation, operation and maintenance of elec- tric machinery should be performed by qualified personnel. Familiarization with

NEMA Safety Standard for Construction and Guide for Selection, Installation and

Use of Integral HP Motors and Generators, National Electrical Code and sound local practices is recommended.

These instructions do not purport to cover all details or variations in equipment nor to provide for every possible contingency or hazard to be met in connection with installation, operation and maintenance. Should further infor- mation be desired or should particular problems arise which are not covered sufficiently for the purchaser’s pur- poses, the matter should be referred to GE Industrial Systems.

II.RECEIVING

The equipment should be placed under adequate cover immediately upon receipt, as packing coverings are NOT suitable for out-of-doors or unprotected storage.

Each shipment should be carefully examined upon arrival. Any damage should be reported promptly to the carrier and to the nearest office of GE Industrial Systems.

A.Storage

During installation or when in storage, the machine and its parts must be protected from the following:

1.Dirt of all kinds.

2.Wetness and temperature extremes.

Protection from dirt can be achieved by covering the machine with a tarpaulin or polyethylene sheet or keeping it in a clean area.

Protection from wetness and temperature extremes includes moisture from the surrounding atmosphere con- densing onto cooler machine surfaces. This condensation on machine surfaces can result in rusting or corro- sion and the electrical windings may suffer serious damage.

Where wetness and/or cold conditions are present, the machine and its parts must be protected by a safe reli- able heating system which, at all times, will keep the machine temperature slightly above that of the sur- rounding atmosphere. If a space heater is included in the machine, it should be energized.

Smaller machines shipped in paper cartons are protected from condensing-type wetness by the insulating characteristics of the carton. To avoid sweating where these have been exposed to low temperature for an extended period, allow the machine and carton to attain room temperature before unpacking.

5

Page 4 Page 6
Page 5
Image 5
GE GEH-5304A manual II. Receiving, Storage
Page 4 Page 6

GEH-5304A specifications

The GE GEH-5304A is a sophisticated electronic device that has garnered attention for its applications in various industrial sectors. This cutting-edge equipment is primarily used for monitoring and controlling processes through advanced technology integration, making it a valuable asset for businesses looking to enhance operational efficiency.

One of the standout features of the GE GEH-5304A is its robust data acquisition system. This system effectively collects, processes, and analyzes data from multiple sensors and instruments, enabling real-time monitoring of critical parameters. With its high sampling rate and accuracy, the GEH-5304A ensures that users can make informed decisions based on reliable data, thus minimizing risks and enhancing productivity.

The GEH-5304A integrates seamlessly with various communication protocols, including Ethernet, RS-232, and RS-485. This versatility allows it to connect effortlessly to existing infrastructure and facilitates data sharing across different platforms. This interoperability is essential in modern industrial environments, where different systems must communicate for optimal performance.

Another key characteristic of the GEH-5304A is its user-friendly interface. The device features an intuitive display that provides clear visualizations of data trends, alarms, and system statuses. This ease of use empowers operators to quickly identify issues and make necessary adjustments, thereby reducing downtime and improving overall operational reliability.

In terms of advanced technology, the GEH-5304A boasts built-in diagnostics and predictive maintenance capabilities. These features enable it to identify potential problems before they escalate into failures, allowing for proactive maintenance and minimizing costly unscheduled outages. Moreover, the device's ability to log historical data plays a crucial role in trend analysis and long-term planning.

Durability is another hallmark of the GE GEH-5304A. Designed to withstand harsh industrial conditions, it demonstrates resilience against temperature fluctuations, vibration, and dust. This robustness enhances its longevity and reduces the frequency of replacements and repairs.

In summary, the GE GEH-5304A stands out in the market due to its advanced data acquisition capabilities, compatibility with multiple communication protocols, user-friendly interface, predictive maintenance functionalities, and rugged design. These features make it an essential tool for industries seeking to optimize performance, enhance monitoring, and ensure process reliability. With the ongoing evolution of technology, devices like the GEH-5304A are pivotal in driving operational success across various sectors.
Top Page Image Contents