C |
With the Bus Controller selected in the rack display, zoom into the Bus Controller to display the bus configuration screen.
In this example, the bus configuration screen shows the bus controller being configured at its default location±±bus address 31. To select a bus address for the Remote I/O Scanner, move the cursor to the desired number and press F8 (Remote).
Note
If a Remote I/O Scanner has a bus address conflict on an operating bus, it will not scan the modules in the remote drop until the fault is cleared.
Press the Enter key to accept the Remote I/O Scanner (IC697BEM733).
Appendix C Logicmaster 90±70, Rel. 3: Series 90±70 PLC Configuration for Remote Drops 135
