GE GFK0579B Storing the Configuration to the PLC, Storing a Remote Drop Configuration

4

Storing the Configuration

In addition to storing the central PLC configuration, a remote drop configuration created with Logicmaster 90 software must be stored to each Remote I/O Scanner as described below.

Storing the Configuration to the PLC

Use the Utility functions to store the program folder to the PLC as described in the

Logicmaster 90±70 User's Manual.

Storing a Remote Drop Configuration

Follow the steps below to store a remote drop configuration to a Remote I/O Scanner.

1.Set up the programmer to communicate with the Remote I/O Scanner.

2.Go to the Program Utility Functions menu.

3.Select F2 ... Store from Programmer to PLC .

4.Press the Enter key. A list of the remote drop configurations in the folder appears:

	S T O R E C O N F I G U R A T I O N			D A T A
	F R O M P R O G R A M M E R T O			P L C
SELECT CONFIGURATION FILE TO STORE:
CUR	DROP017	DROP 033	DROP034
PLC
<< TO SELECT A CONFIGURATION FILE, CURSOR TO OR TYPE ITS FILE NAME					>>
<< AND PRESS ENTER; USE PGUP/PGDN TO PAGE THROUGH CONFIGURATION					>>
<< FILE NAMES; PRESS ESCAPE TO EXIT.					>>

5.Select the configuration file to be stored by typing its filename or selecting it from the list. If the list of filenames is long, you can use the Pg/Up, Pg/Dn, Home and End keys to display other entries.

6.With the filename selected, press Enter again. The screen prompts: I/O scanning will be suspended during STORE; continue store? (Y/N).

7.If you press Y, the configuration is stored.

8.After a successful store, the SNP ID for the Remote I/O Scanner is displayed in the status area at the bottom of the Logicmaster screen.

Chapter 4 Configuration with Logicmaster 90±70 75