GE GNSV75RWW, GNSV70RBL Before you call for service…, Problem Possible Causes What To Do

Models: GNSV75RWW GNSV70RBL

1 16
Download 16 pages 55.56 Kb
Page 13
Image 13

Before you call for service…

Troubleshooting Tips

Save time and money! Review the chart below first and you may not need to call for service.

Problem

Possible Causes

What To Do

Water contains tiny

New filter canisters contain

Turn on the filtered water faucet and allow these initial carbon

black particles

activated carbon.

particles to purge from the canisters. Turn off the faucet when the

 

 

water is clear.

 

 

 

Water has air bubbles

Air in system after installation.

Will go away after water runs for a while.

and is cloudy

 

 

 

 

 

Indicator light on the

Six months usage has occurred.

Replace both filter canisters and battery in the faucet base.

faucet base is flashing

This is the maximum life of

 

 

the filter canisters.

 

 

 

 

Indicator light on the

Normal operation.

Does not blink until 6 months of operation has passed.

faucet base is not blinking

 

 

 

Battery may need to be replaced.

Normally the light is not on. The light blinks every 30 seconds to

 

 

indicate a filter change is needed. This occurs about every 6 months.

 

 

Replace battery. Indicator light will blink rapidly 5 times to indicate

 

 

proper installation and operation.

Indicator light on the faucet base is not working when new battery is installed

Battery may need to be replaced or it may have been installed incorrectly.

Observe orientation markings on the holder. Install with battery “+” side down.

Chlorine taste and/or

The filter canisters are no

Replace the filter canisters.

odor in the product water

longer reducing chlorine,

 

 

taste and odor from the

 

 

water supply.

 

Water dispenses

The filters have been installed

very slowly

for too long.

A six-month change-out period is recommended. Replace both filter canisters.

The filter canisters have

High sediment levels can cause premature clogging. Replace both

become clogged.

filter canisters.

Fittings are leaking

Tubing may not be installed

 

properly.

Fully follow the installation instructions and be sure the tubing is free of nicks, burrs, etc., and is installed to the proper depth.

No water dispensing

Filter canisters not fully

Fully follow the filter replacement instructions.

from system

installed.

 

13

Page 13
Image 13
GE GNSV75RWW, GNSV70RBL owner manual Before you call for service…, Problem Possible Causes What To Do