GE JBS08PIC International Installation Instructions. 220-240, 50/60Hz, 2-wire, And Ordinances

Cleaning Operating Instructions Safety Instructions

International Installation Instructions. (220–240, 50/60Hz, 2-wire)

Read these instructions completely and carefully.

Before You Begin

IMPORTANT: Save these instructions for the local	NOTE TO INSTALLER: Leave these instructions
electrical inspector’s use.	with the appliance after installation is completed.
IMPORTANT: OBSERVE ALL GOVERNING CODES	NOTE TO CONSUMER: Keep this Owner’s Manual
AND ORDINANCES.	and Installation Instructions for future use.
	NOTE: This appliance must be properly grounded.

Tools You Will Need

■Large blade screwdriver	■3/16″ open-end or socket wrench
■6 mm (1/4″ )hex head nutdriver	■1 3⁄8″ open-end or adjustable wrench
■Channel lock pliers	■Tape measure

Electrical Requirements

Troubleshooting Tips Installation Instructions Care and

CAUTION, FOR PERSONAL SAFETY: DO NOT USE AN EXTENSION CORD WITH THIS APPLIANCE. REMOVE HOUSE FUSE OR OPEN CIRCUIT BREAKER BEFORE BEGINNING INSTALLATION.

This appliance must be supplied with the proper voltage and frequency, and connected to an individual, properly grounded branch circuit, protected by a circuit breaker or time delay fuse, as noted on the rating plate.

Wiring must conform to National Electric Codes.

If the electric service provided does not meet the above specifications, have a licensed electrician install an approved outlet.

Because range terminals are not accessible after range is in position, flexible service conduit or cord must be used.

16