AUTO DEFROST

Auto Defrost

With the Auto Defrost feature, the oven automatically sets the defrosting times and power levels for you.

Use the Auto Defrost Guide. Enter the food weight in pounds and tenths of a pound (see Conversion Guide below). Then touch START pad.

The oven calculates defrosting time and changes power levels during defrosting to give even defrosting results.

Cooking by

How to Set Auto Defrost

Before you begin, check the Auto Defrost guide located in this section. It shows minimum and maximum food weights for a variety of foods. You will need to know your food weight before setting Auto Defrost.

Step 1: Remove food from package, place in oven on microwave-safe dish and close door.

Step 2: Touch AUTO DEFROST pad.

AUTO

DEFROST

Step 3: Enter weight. For example, touch number pads 1 and 2 for weight of 1.2 pounds (1 pound, 3 ounces). See Conversion Guide below. After approximately 5 seconds “START” flashes.

 

Step 4: Touch START pad. Display shows

 

START

defrost time counting down.

 

 

 

Twice during defrosting,

the oven beeps 4 times

and ‘‘TURn’’ flashes. Follow the directions in the Auto Defrost Guide

for what to do at the

first and second signal. Then close the door and touch START pad.

When defrosting time is completed, ‘‘End’’ flashes and oven beeps 4 times. ‘‘End’’ remains on display and oven beeps every minute until door is opened or CLEAR/OFF pad is touched.

Stand Time

After Auto Defrosting, meat needs to stand in order to let the inside defrost. You may take the food out of the oven if you wish. Stand time recommendations are given in the Auto Defrost Guide.

Conversion Guide

If the weight of food is stated in pounds and ounces, the ounces must be converted to tenths (.1) of a pound.

Ounces

Pounds

 

 

1–2

.1

 

 

3

.2

 

 

4–5

.3

 

 

6–7

.4

 

 

8

.5

 

 

9–10

.6

 

 

11

.7

 

 

12–13

.8

 

 

14–15

.9

 

 

Temperature

Auto Defrost

17

Page 17
Image 17
GE JEB1095 warranty Auto Defrost

JEB1095 specifications

The GE JEB1095 is a state-of-the-art jet engine that has made significant strides in aerospace technology. Known for its exceptional performance and reliability, it’s designed for both commercial and military aircraft applications. This engine exemplifies GE’s commitment to innovation and efficiency in the aviation industry.

One of the standout features of the JEB1095 is its advanced turbofan design. It incorporates a wide-chord fan that enhances efficiency at various speed ranges, providing a significant reduction in fuel consumption. This makes the engine not only cost-effective for operators but also more environmentally friendly, aligning with the global push for sustainable aviation.

The JEB1095 is equipped with a sophisticated digital engine control system. This technology allows for precise monitoring and adjustments of engine parameters in real-time. By optimizing performance during different flight phases, it ensures maximum efficiency and optimal thrust delivery. Pilots benefit from increased situational awareness, which additionally contributes to enhanced safety in operations.

Another key characteristic of the JEB1095 is its durability and long lifecycle. The engine features advanced materials, including lightweight composites and titanium alloys, which improve its structural integrity while reducing overall weight. These materials are designed to withstand extreme temperatures and pressures, resulting in longer maintenance intervals and reduced operating costs.

The engine’s noise reduction technology is also notable. It employs a series of acoustic treatments and advanced fan blade designs that minimize noise during takeoff and landing phases. This is particularly beneficial for commercial operations, as it helps airports comply with stringent noise regulations while improving the experience for passengers and surrounding communities.

In conclusion, the GE JEB1095 is a remarkable example of modern engineering in the aviation sector. Its combination of efficiency, advanced technology, and durability positions it as a top choice for airlines and military operators alike. As the aerospace industry continues to evolve, the JEB1095 sets a benchmark for performance, paving the way for future innovations in jet engine design. Its commitment to sustainability and efficiency makes it a pivotal player in the ongoing transformation of air travel.