Installation Instructions
COOKTOP BURNERS
1ASSEMBLING THE COOKTOP BURNERS
The electrode of the spark igniter is exposed. Be careful not to push any cooktop controls while the top of the burner is removed.
Do not remove the top or touch the electrode of any burner while another burner is turned on. Electrical shock might result.
A Replace the burner head onto the burner |
base, making sure that the head is |
C
Make sure the pins in the burner heads match the burner base indentations and that they are properly seated in them by rotating the heads until they are level.
Burner cap
Burner head
Electrode
Locator |
pins |
properly oriented over the burner base |
and the electrode. Make sure to place |
the correct burner head on the correct |
burner base and that the burner head |
sits level on the burner base. The burner |
heads are not interchangeable. |
B Place the burner |
caps on the |
burner heads, making sure to place the correct burner cap on the
correct burner | Burner cap properly seated | |
head. The burner |
| |
caps are not |
| |
interchangeable. |
| |
Make sure that |
| |
the burner caps |
| |
are properly | Burner cap not properly seated | |
seated on the | ||
| ||
burner heads. |
|
|
|
| Burner |
|
| Pin | base |
Make sure the |
| indentations | |
|
|
| |
slot in the |
| Burner cap |
|
burner head is |
|
| |
|
|
| |
positioned |
|
|
|
over the |
| Burner head |
|
electrode. |
|
| |
|
|
| |
The burner | Stability |
| |
cap has |
| ||
chamber |
| ||
three to four |
|
| Electrode |
pins. When |
|
|
|
replacing the |
|
|
|
cap, make |
| Burner base |
|
sure none of |
|
| |
|
|
| |
the pins sits |
|
|
|
in the stability |
|
|
|
chamber. |
|
|
|
Make sure the hole |
| Burner cap | |
in the burner head |
|
| |
assembly is |
|
|
|
positioned over the | Burner head |
| |
electrode and that | assembly |
| |
the burner head is |
|
| |
fully inserted inside |
|
| |
the burner base. A |
|
| |
small gap between |
|
| |
the base and head |
|
| |
is normal. |
|
|
|
|
| Electrode | Burner |
|
|
| base |
10