GE ZGU36, JGP630 Installing The Cooktop Unit, 2PROTECT SURFACE OF COOKTOP, Attach Foam Tape

Installation Instructions

INSTALLING THE COOKTOP UNIT

1LOCATE ELECTRICAL OUTLET AND GAS SHUT-OFF VALVE BENEATH CABINET

NEVER REUSE
OLD CONNECTORS
WHEN INSTALLING Shut-Off		Electrical
THIS UNIT.	Valve
		Outlet 12″
		Below
		Countertop

Install a manual shut-off valve in the gas line in an easily accessible location outside the cooktop. Be sure you know how and where to shut off the gas supply to the cooktop. Install the electrical outlet 12″ below the countertop.

2PROTECT SURFACE OF COOKTOP

Place a towel or tablecloth onto the countertop. Lay the cooktop upside down onto the protected surface.

Bottom of cooktop

Cloth under Cooktop

3 ATTACH FOAM TAPE

(glass maintop models only)

Apply the foam tape around the outer edge of the glass. Do not overlap the foam tapes.

Bottom of Cooktop

Foam Tapes

Cooktop Glass

4 LOCATE MOUNTING PARTS

Remove the hold down brackets from the literature package.

5ATTACH BRACKETS TO COOKTOP

Remove the screw from the bottom of the cooktop and screw the hold-down bracket to the side of the cooktop unit. Repeat for opposite side of cooktop.

Pre-drilled

hole

Bottom of

Cooktop

Foam Tapes

Cooktop

Glass

6INSERT COOKTOP INTO CUTOUT

Insert the cooktop centered into the cutout opening. Make sure the front edge of the countertop is parallel to the cooktop. Make final check that all required clearances are met.

Cooktop

Once the unit is in place, screw the hold- down bracket into the cabinet sides to secure the unit into place.

5