GE JGP970 Installation Instructions PREPARING THE OPENING, 3CUTOUT DIMENSIONS OF COUNTERTOP

Installation Instructions

PREPARING THE OPENING

1MAINTAIN THE FOLLOWING MINIMUM CLEARANCE DIMENSIONS

4RECOMMENDED GAS SUPPLY LOCATION FROM BACKWALL

13″ MAX. Depth of unprotected overhead cabinets

30″ MIN. clearance from countertop to unprotected overhead surface

3-3/4″MIN. clearance from cutout to side wall on the left of the unit

6″ MIN. clearance from cutout to side wall on the right of the unit

18″ MIN. height from countertop to nearest cabinet on either side of unit

1” Min. From Backwall

Recommended gas supply location

From Cutout

Center Line

NOTE: All gas cooktop models require 7/16″ free area below cooktop height to combustible material.

2OVERALL COOKTOP DIMENSIONS

		21″ (21-1/4″Max. for
36″		Glass Top models)
	Cooktop	3″
18-7/8″	33-11/16″

3CUTOUT DIMENSIONS OF COUNTERTOP

5MAKE SURE WALL COVERINGS, COUNTERTOP AND CABINETS AROUND COOKTOP CAN WITHSTAND HEAT (UP TO 200°F)

GENERATED BY COOKTOP

Wall covering, cabinets and countertop must withstand heat up to 200°F

To ensure accuracy, it is best to make a template when cutting the opening in the counter.

33-7/8”

length

19-1/8” width cut

16-15/16″

2-1/4” Min. Between cutout and the wall behind the cooktop

of cut

2-1/2” Min. from

front edge of

cutout and front

edge of countertop

4