Instructions

Special features of your oven control.

Instructions Safety

Tones at the End of a Timed Cycle

At the end of a timed cycle, 3 short beeps will sound followed by one beep every 6 seconds until the CLEAR/OFF pad is pressed. This continual 6-second beep may be canceled.

To cancel the 6-second beep:

Press the BAKE and BROIL HI/LO pads at the same time for 3 seconds until the display shows SF.

Press the KITCHEN TIMER ON/OFF pad. The display shows CON BEEP (continual beep). Press the KITCHEN TIMER ON/OFF pad again. The display shows BEEP. (This cancels the one beep every 6 seconds.)

Press the START pad.

Consumer Support Troubleshooting Tips Care and Cleaning Operating

12-Hour, 24-Hour or Clock Blackout

Your control is set to use a 12-hour clock.

If you would prefer to have a 24-hour military time clock or black out the clock display, follow the steps below.

Press the BAKE and BROIL HI/LO pads at the same time for 3 seconds until the display shows SF.

Press the CLOCK pad once. The display will show 12 hr. If this is the choice you want, press the START pad.

Press the CLOCK pad again to change to the 24-hour military time clock. The display will show 24 hr. If this is the choice you want, press the START pad.

Press the CLOCK pad again to black out the clock display. The display will show OFF. If this is the choice you want, press the START pad.

NOTE: If the clock is in the blackout mode you will not be able to use the Delay Start function.

10

Page 10
Image 10
GE JMP31CLCC owner manual Instructions, Tones at the End of a Timed Cycle, Hour, 24-Hour or Clock Blackout