Care and cleaning of the range. | ge.com |
Be sure electrical power is off and all surfaces are cool before cleaning any part of the range.
How to Remove Protective Shipping Film and Packaging Tape
Safety
Carefully grasp a corner of the protective shipping film with your fingers and slowly peel it from the appliance surface. Do not use any sharp items to remove the film. Remove all of the film before using the appliance for the first time.
To assure no damage is done to the finish of the product, the safest way to remove the adhesive from packaging tape on new appliances is an application of a household liquid dishwashing detergent. Apply with a soft cloth and allow to soak.
NOTE: The adhesive must be removed from all parts. It cannot be removed if it is baked on.
Instructions Operating
Control Panel
It’s a good idea to wipe the control panel | Do not use abrasive cleansers, strong |
after each use. Clean with mild soap | liquid cleansers, plastic scouring pads or |
and water or vinegar and water, rinse | oven cleansers on the control |
with clean water and polish dry with | will damage the finish. A 50/50 solution |
a soft cloth. | of vinegar and hot water works well. |
Instructions
Clear groove in stem
Molded rib
Control Knobs
The control knobs may be removed for easier cleaning.Make sure the knobs are in the OFF positions and pull them straight off the stems for cleaning.
The knobs can be cleaned in a dishwasher or they may also be washed with soap and water. Make sure the insides of the knobs are dry before replacing.
Replace the knobs in the OFF position to ensure proper placement.
Oven Vent
The oven is vented through an opening | Never cover the opening with aluminum foil or |
under the right rear surface unit. | any other material. |
Porcelain Enamel Cooktop
The porcelain enamel finish is sturdy but breakable if misused. This finish is
If acids spill on the cooktop while it is hot, use a dry paper towel or cloth to wipe it up right away. When the surface has cooled, wash with soap and water. Rinse well.
For other spills such as fat spatterings, wash with soap and water or cleansing powders after the surface has cooled. Rinse well. Polish with a dry cloth.
Consumer Support
19
