ge.com

Oven Heating Elements

Do not clean the bake element or the broil element. Any soil will burn off when the elements are heated.

To clean the oven floor, gently lift the bake element. Clean with warm soapy water.

Painted Surfaces

Painted surfaces include the sides and

Do not use commercial oven cleaners,

the drawer front.

cleaning powders, steel wool or harsh

Clean these with soap and water or

abrasives on any painted surface.

 

a vinegar and water solution.

 

Safety Instructions Operating Instructions

Wire cover holder.

Oven Light Replacement

CAUTION: Before replacing your oven light bulb, disconnect the electrical power to the range at the main fuse or circuit breaker panel.

Be sure to let the light cover and bulb cool completely.

To remove the cover:

Hold a hand under the cover so it doesn’t fall when released. With fingers of the same hand, firmly push back the wire cover holder. Lift off the cover.

Do not remove any screws to remove the cover.

Replace bulb with a 40-watt appliance bulb.

To replace the cover:

Place it into groove of the light receptacle. Pull wire forward to the center of the cover until it snaps into place.

Connect electrical power to the range.

Care and Cleaning Troubleshooting Tips Consumer Support

21

Page 21
Image 21
GE JMP31CLCC Oven Heating Elements, Painted Surfaces, Oven Light Replacement, To remove the cover, To replace the cover