How to Set Delay Start of Cleaning
Quick Reminder:
1.Prepare the oven for cleaning.
2.Close the oven door completely.
3.Slide the latch handle to the right as far as it will go.
4.Press the CLEAN pad.
5.Press the INCREASE or DECREASE pad until the desired Clean Time appears.
6.Press the STOP TIME pad.
7.Press the INCREASE or DECREASE pad until the desired Stop Time appears in the display.
Delay Start is setting the oven timer to start the clean cycle automatically at a later time than the present time of day. NOTE: Before beginning, make sure the oven clock shows the correct time of day.
1.Follow steps to prepare the oven for cleaning.
2.Slide the latch handle to the right as far as it will go.
Never force the latch handle. Forcing the handle will damage the door lock mechanism.
3.Press the CLEAN pad.
4.Press the INCREASE or DECREASE p d to enter Clean Time.
5.Press the STOP TIMEL Dad. “SET STOP1IME” and the earliest Stop Time you can set w.11 appear on the display.
The earliest Stop Time will be the Clean ime selected plus the time of day. For exam le: If the Clean Time is 3 hours and the time o day
is 6:00, the Stop Time that appears on th display will be 9:00.
6., Press the INCREASE vad to change the/tov Time to a later time o~dav ifdesifid. Fo~ ‘ example: If you set Stop ”Time at 11:00, ven.. will start clean cycle at 8:00 and end at 11:00. The door latches automatically.
The
7. When the LOCK light is off, slide the lat h handle to the left as far as it will go and open th door.
Questions and Answers
Q. If my oven clock is not set to the correct time of day, can I still
A. If the clock is not set to the correct time of day, you will not be able to set a delay clean to end at a specific time.
Q. Can I use commercial oven cleaners on any part of my
A. No cleaners or coatings should be used around any
part of this oven. If you do use them and do not thoroughly rinse the oven with water, wiping it absolutely clean afterwards, the residue can scar the oven surface and damage metal parts the next time the oven is automatically cleaned.
Q. What should I do if excessive smoking occurs
during cleaning?
A. This is caused by excessive soil. Press the CLEAW OFF pad. Open windows to rid room of smoke. Wait until the oven has cooled and the word “LOCK” is off in the display. Wipe up the excess soil and reset the clean cycle.
Q. Is the “crackling” or “popping” sound I hear
during cleaning normal?
A. Yes. This is the sound of the metal heating and cooling during both the cooking and cleaning functions.
Q. Should there be any odor during the cleaning?
A. Yes, there may be an odor during the first few cleanings. Failure to wipe out excessive soil might also cause a strong odor when cleaning.
Q. What causes the
surface of my oven?
A. This is a normal condition, resulting fror n heating and cooling during cleaning. These lines do not affect how your oven performs.
Q. Why do I have ash left in my oven after
v cleaning?
A. Some types of soil will leave a deposit WIlich is ash. It can be removed with a damp sponge c r cloth.
Q. My oven shelves do not slide easily. What is
the matter?
A. After many cleanings, oven shelves may become so clean they do not slide easily. To mak e shelves slide more easily, after each
Q. My oven shelves have become gray af ;er the
A. Yes. After the
Q. Can I cook food on the cooktop while the oven is
A. Yes. While the oven is
Q. The word “DOOr” appeared on the d splay
when I selected the clean cycle. What’s wrong?
A. The door latch handle must be moved althe way | |
to the right. Move the latch handle and c leaning | |
will start. | 19 |
| |
