GE JTP10GS warranty Q? Q, Features Of Your Own Control, Broil Qstop

FEATURES OF YOUR OWN CONTROL

Q? Q

jJ~JCLOCK CLEAN

I

WnBAKE COOK

TIME

BROIL QSTOP

TIME

—

,

1.TIMER or TIMER ON/OFF. Press this pad to select the timer function. The timer does not control oven operations. The timer can time up to 9 hours and 55 minutes.

To set the timer, first press TIMER or TIMER ON/OFF pad. Then press the INCREASE or DECREASE pad to change the time.

To cancel the timer, press and hold the

TIMER ON/OFF pad.

2.CLEAWOFF. Press this pad to cancel all oven operations except clock and timer.

3.PROGRAM STATUS. Words light up in the display to indicate what is in time display. Programmed information can be displayed at any time by pressing the pad of the operation you want to see. For example, you can display the current time of day while the timer is counting down by pressing the CLOCK pad.

4.TIME DISPLAY. Shows the time of day, the times set for the timer or automatic oven operation.

5.OVEN TEMPERATURE AND BROIL DISPLAY. Shows the oven temperature or the broil setting selected.

6.FUNCTION INDICATORS. Light up to show whether oven is in bake, broil or self-clean mode.

7.INCREASE. Short taps to this pad increase time or temperature by small amounts. Press and hold pad to increase time or temperature by larger amounts.

8.BAKE. Press this pad to select the bake function.

9.COOK TIME. Press this pad for Timed Bake operations.

10.CLOCK. To set the clock, first press the CLOCK pad. Then press the INCREASE-or DECREASE pad to change the time of day. Press the CLOCK pad to start.

11.CLEAN. Press this pad to select self-cleaning function. See the Operating the Self-Cleaning Oven section.

12.DECREASE. Short taps to this pad decrease time or temperature by small amounts. Press and hold pad to decrease time or temperature by larger amounts.

13.BROIL. Press this pad to select the broil function.

14.STOP TIME. Use this pad along with

COOK TIME or CLEAN to set the oven to stop automatically at a time you select.

If ,,F—>,and a number flash in display and the control beeps, this indicates function error code. If function error code appears during the self-cleaning function, check the oven door latch—the latch handle may have been moved, even if only slightly, from the latched position. Make sure the handle is to the right as far as it will go. Press the CLEAWOFF pad. Allow the oven to cool for 1 hour. If function error code repeats, disconnect power to the range and call for service.

6