Uniden UIP1869V owner manual Multi-Handset Features, Using DirectLink Mode

Multi-Handset Features

The features in this section require a minimum of two handsets to operate. To add additional handsets to your system, see "Expanding Your Phone" on page 15.

Using DirectLink Mode

In DirectLink Mode, a pair of handsets can function as two-way radios. DirectLink Mode does not interfere with the base's ability to make or receive telephone calls. You must set both handsets to DirectLink Mode to make a directlink call.

To enter DirectLink mode, select the Direct Link option from the main menu, and then press the ENTER soft key. Direct Link Mode complete. appears once the selection is confirmed.

note

•If the party is out of

range, No Signal

appears in the display, and the operation will be canceled.

•While a pair of handsets are in DirectLink mode, they cannot be used to make or receive calls. Other handsets can still make and receive

MULTI-HANDSET

To make a DirectLink call, press the DirectLink soft key. Select the handset you want to call. To answer a DirectLink call, press talk/flash or if Any Key Answer is on, press any number key, */ tone or #. Press end when you want to hang up.

To exit DirectLink mode and be able to receive normal phone calls again, press the CANCEL soft key, and then press the OK soft key.

&KTGEV.KPM

5'.'%6

calls.

FEATURES

w w w . u n i d e n . c o m M U L T I - H A N D S E T F E A T U R E S [ 6 8 ]