Liquid Damage
Moisture and liquid can damage your cordless phone. In case of accidental submersion, please read the following steps.
Case | Action |
|
|
If the handset or base is exposed to |
|
moisture or liquid, but it only affects the | Wipe off the liquid, and use as normal. |
exterior plastic housing. |
|
|
|
If moisture or liquid has entered the | Handset: |
1)Remove the battery cover and leave it off for ventilation. | |
in the phone or liquid has entered the | 2)Remove the battery pack by disconnecting. |
handset battery compartment or vent | 3)Leave the battery cover off and the battery pack disconnected for at least 3 days. |
openings on the base). | 4)Once the handset is completely dry, reconnect the battery pack and the battery cover. |
| 5)Recharge the handset's battery pack for 20 hours before using again. |
| Base: |
| 1)Disconnect the AC adapter from the base unit, cutting off electrical power. |
| 2)Disconnect Ethernet cable from the WAN port. |
| 3)Let dry for at least 3 days. |
| Important: You must leave the Ethernet cable unplugged while recharging the battery |
| pack to avoid interrupting the battery charge. |
| CAUTION: |
| DO NOT use a microwave oven to speed up the drying process. This will cause permanent |
| damage to the handset, base and the microwave oven. |
| After following these steps, if your cordless telephone does not work, please contact |
| Customer Service (see back page). |
|
|
w w w . u n i d e n . c o m | T R O U B L E S H O O T I N G [ 8 0 ] |
T R O U B L E S H O O T I N G
