Uniden UIP1869V owner manual Using One Touch Voice Mail Access, Resetting the New Message LED

Using One Touch Voice Mail Access

The UIP1869V provides one-touch access to Vonage's voice mail service. When you sign up for voice mail with Vonage, you will receive an email containing a specially-assigned phone number and access code for your voice mail.

Follow the steps below to program the Vonage phone number and access code into the base and any handset(s):

From the handset, go to System Setup, and choose Handset.

1) From the base, press the MENU soft key, then choose Base Setup.

2) Scroll down and select Edit Voice Mail. Edit V_ mail No. appears in the display.

3)Enter the voice mail phone number sent to you by Vonage.

4)Enter a single pause.

5)Enter the four-digit access code sent to you by Vonage.

6)Press the OK soft key.

When you have new messages, the New Message LED will flash. To retrieve your messages, simply press the soft key. If you have not entered the access number or it has been deleted, when you press the soft key, No Number Stored To store number press [MENU] appears and you will hear a beep. The phone returns to standby mode.

Resetting the New Message LED

If the LED remains on after you've retrieved your messages, you may need to reset the indicators. To reset the New Message LED, press and hold find handset for 5 seconds.

w w w . u n i d e n . c o m

note

The Voice Mail tone is pre-programmed to support Vonage voice mail service. Do not alter this setting.

System Setup

Handset

Edit Voice

Mail

B A S I C S [ 5 0 ]

B A S I C S