GE JTP10GS warranty Broiler Pan and Rack, Control Panel

Proper care and cleaning are important so your oven will give you efficient and satisfactory service. Follow these directions carkfully in caring for your oven to assure safe and proper maintenance.

Oven Shelves

Clean the oven shelves with a mild abrasive cleanse~. After cleaning, rinse the shelves with clean water ~d dry with a clean cloth.

To remove heavy, burned-on soil, soapy metal pads. may be used. After scrubbing, wash with soapy wat~r, rinse and dry.

The oven shelves may be cleaned in the self-cleanin$ oven. However, they will darken, lose their luster and become hard to slide. Wipe the shelf supports with ~ cooking oil after self-cleaning to make shelves slide more easily.

Broiler Pan and Rack

After broiling, remove the broiler pan and rack froh the oven. Remove the rack from the pan. Carefully ~ pour out the grease in the pan into a proper containe~. Wash and rinse the pan and rack in hot, soapy water.

If food has burned on, sprinkle the rack while hot ~ with detergent and cover with wet paper towels or a ~ dish cloth. Burned-on foods will soak loose while the meal is being served. Wash, scour if necessary with ~ soap-filled or plastic scouring pad. Rinse well and diy.

a

Do not store a soiled broiler pan and rack in the oven.

Do not clean in the self-cleaning oven.

The broiler pan and rack may also be cleaned in the dishwasher.

Oven Light

Before replacing the light bulb, disconnect the power to the oven.

To replace the oven light:

Be sure the bulb is cool. Do not touch a hot bulb with a damp cloth, as the bulb may break. Use a dry potholder, to prevent possible harm to hands, and very carefully unscrew the bulb cover and bulb.

Replace wi~h a 40 watt appliance

bulb. Replace the bulb cover and reconnect the power to the oven.

NOTE: Yo~ will need to reset the clock.

Control Panel

It is a good idea to wipe the control panel after each ~ use of the oven. Clean with mild soap and water or ~ vinegar and water, rinse with clean water and polish ~ dry with a soft cloth.

Do not use abrasive cleansers, strong liquid cleaners, plastic scouring pads or oven cleansers on the control panel—they will damage the finish. A 50/50 solution of vinegar and hot water works well.

20