Instructions
Care and cleaning of the vent hood.
Be sure electrical power is off and all surfaces are cool before cleaning or servicing any part of the vent hood.
Consumer Support Troubleshooting Tips Care and Cleaning Operating Instructions Safety
ReceptacleSocket
Bulb
Glass cover
Hood Lights
NOTE: The glass cover should be removed only when cold. Wearing latex gloves may offer a better grip.
CAUTION: Before replacing your light bulb, disconnect the electrical power to the hood at the main fuse or circuit breaker panel.
Be sure to let the light cover and bulb cool completely.
For your safety, do not touch a hot bulb with bare hands or a damp cloth.
To remove:
Turn the glass cover counterclockwise until the glass cover clears the socket.
Using gloves or a dry cloth, remove the bulb by pulling it straight out.
To replace:
Use a new
Using gloves or a dry cloth, remove the new bulb from its packaging.
NOTE: Do not touch the new halogen bulb with bare fingers. Touching the bulb with bare fingers will significantly reduce the life of the bulb.
Receptacle
Use gloves or cloth
Push the bulb straight into the receptacle all the way.
Place the glass cover onto the socket and turn clockwise until secure.
For improved lighting, clean the glass cover frequently using a damp cloth. This should be done when the hood is completely cool.
Reconnect electrical power to the hood.
6
