GE JVM1660 owner manual The Exhaust Feature, To Remove Charcoal Filter, To Install Charcoal Filter

Models: JVM1660

1 52
Download 52 pages 44.47 Kb
Page 43
Image 43
The Exhaust Feature

The Exhaust Feature

Charcoal Filter (on some models)

The charcoal filter cannot be cleaned. It must be replaced. Order Part No. WB02X9883 from your GE supplier.

If the model is not vented to the outside, the air will be recirculated through a disposable charcoal filter that helps remove smoke and odors.

The charcoal filter should be replaced when it is noticeably dirty or discolored (usually after 6–12 months, depending on hood usage). See “Optional Kits,” page 9, for more information.

To Remove

Charcoal Filter

To remove the charcoal filter, disconnect power at the main fuse or circuit breaker panel or pull the plug.

Remove 2 grille screws to remove the grille.

Remove the top grille by removing the 2 screws that hold it in place. Slide the filter towards the front of the oven and remove it.

To Install

Charcoal Filter

To install a new filter, remove plastic and other outer wrapping from the new filter.

Insert the filter into the top opening of the oven as shown. It will rest at an angle on 2 side support tabs and in front of the right rear tab. Replace the grille and 2 screws.

43

Page 43
Image 43
GE JVM1660 The Exhaust Feature, To Remove Charcoal Filter, To Install Charcoal Filter, Charcoal Filter on some models