Your Touch Control Wnel
The Touch Control Panel allows you to set the oven controls electronically with the touch of a finger. It’s designed to be easy to use and understand.
When You Plug in the Oven
The display panel displays five 8’s, 18 POWER and all of the oven functions. After 15 seconds, all lights disappear and “RESET” appears in the upper portion. Touch the CLEAR/OFF pad, set the CLOCK and oven is ready for use.
If power is disrupted at any time, the above sequence recurs, and you must reset CLOCK after touching the CLEAR/OFF pad.
“Error” Appears on the Display:
●During Auto Cook or Auto Reheat program,
the door was opened before steam could be detected.
“PRObE” Appears on the Display
●Probe has been forgotten when Auto Roast or Temp Cook/Hold function is being used.
c Probe is not securely seated in oven wall receptacle.
1.DISPLAY. Displays time of day, time or temperature during cooking functions, power level being used, cooking mode and instructions.
2.TIME COOK I & II. Microwave for a preset amount of time using automatic power level 10. (If desired, you may change power level after entering cooking time. See page 10.)
3.TIME DEFROST. Gentle thawing at automatic power level 3 (Low). (If desired, you may change power level after entering defrosting time. See page 18. )
4.CLOCK. Touch this pad to enter time of day or check time of day while microwaving. To set clock, first touch CLOCK pad and then enter time of day. For example, if time is 1:30, touch number pads 1, 3 and O and “1:30” will appear in display. Then touch START pad. To reset or change time, simply repeat above process.
5.AUTO START. Allows you to program your oven to begin cooking at a preset time of
6.CLEAR/OFF. When touched, it shuts off the oven and erases all settings (except time of day).
7.AUTO COOK. Touch this pad and then number pad for desired code number. The oven automatically microwaves at
8.AUTO REHEAT. Touch this pad, Code 1 or 2 and START for quick reheating of prepared foods. (See pages
14and 15.)
9.EXHAUST FAN. Press HI, LO or OFF for the different fan speeds.
10.TEMP COOK/HOLD. Use the temperature probe to cook by using a preset temperature. Once food reaches preset temperature, oven switches to HOLD setting and maintains that temperature until you touch the CLEAR/OFF pad. (See page 11.)
U. COOK ‘N WATCH. Use this pad for
~.MIN/SEC TIMER. This feature uses no microwave energy. It functions as either a kitchen timer, as a holding period after defrost or as a delay timer before time or temperature cooking. (See page 9.)
U. MIN. Use with number pads to enter whole minutes. For example, for 4 minutes touch 4 and MIN.
14.NUMBER PADS. Touch these pads to enter cooking time, defrosting time, time of day, temperature, power level, Auto Codes or food weights for Auto Defrost.
15.POWER LEVEL. Touch this pad before entering another power level number if you want to change from automatic power level 10 (High) for cooking or power level 3 (Low) for defrosting.
16.START. After all selections are made, touch this pad to start the oven.
17.AUTO ROAST. Insert probe, touch this pad and then number pad for desired code number to
18.AUTO DEFROST. Touch this pad and food weight. The oven automatically sets power levels and defrosting time. (See page 16.)
U. LIGHT. Touch desired pad to illuminate counter or to turn on night light.
AU~MATIC FAN FEAT~
Cooking appliances installed under the oven may,
under some heavy usage conditions, cause temperatures high enough to overheat some internal parts of the microwave oven.
To prevent overheating from taking place, the exhaust fan is designed to automatically turn on at a low speed if excessive temperatures occur. Should this happen, the fan can not be manually turned off, but it will automatically turn off when the internal parts have cooled. The fan may stay on up to approximately 30 minutes after the range and microwave oven controls have been turned off.
6
