GE JVM1840 owner manual Replacing the light bulbs, Cooktop Light/Night Light, Oven Light

Next, remove the screw located above the door near the center of the oven that secures the light housing.

Remove the bulb from the light housing by gently turning. Replace with the same size and type bulb, then replace the light housing.

To replace the oven light, first disconnect the power at the main fuse or circuit breaker panel or pull the plug.

Safety Instructions

Operating Instructions

Troubleshooting Tips

Consumer Support

Replacing the light bulbs.

Cooktop Light/Night Light

Replace the burned-out bulb with a 40-watt incandescent bulb (WB36X10003), available from your GE supplier.

Remove	1	To replace the bulb(s), first disconnect the
screw		power at the main fuse or circuit breaker panel
		or pull the plug.
	2	Remove the screw at the right edge of the light
		cover and push on the left edge of the cover
		to open.
	3	Be sure the bulb(s) to be replaced are cool
		before removing. After breaking the adhesive
		seal, remove the bulb by gently turning.
		Replace with the same size and type bulb.
	4	Raise the light shield and replace the screw.
		Connect electrical power to the oven.

Oven Light

Replace the burned-out bulb with a 40-watt incandescent bulb (WB36X10003), available from your GE supplier.

1

2 Remove the top grille by taking out the screws that hold it in place and sliding the grille to the left (opening the door makes grille removal easier).

3

4

5 Replace the grille and screws. Connect electrical power to the oven.

36