Making Cable Connections | KTC Compact Cameras |
4)Loosen the ~AC24V terminal connectors on the terminal block and connect the power cable to them.
5)Tighten the terminal connector screws until snug, ensuring that the power leads are secure.
6)Connect the other end of the power cable to the power supply unit and tighten the connector screws until snug.
7)Supply power to the camera.
Note: When you supply power to the camera the PWR LED illuminates. If the PWR LED does not illuminate, check the terminal block connections and power source.
14 | 1041075C / November 2003 |
