Installing the Bracket and Camera |
4.3ADJUSTING THE CAMERA ANGLE
1)If necessary, turn the wing nut (Figure 8) on the bracket counterclockwise to free the ball and socket bolt (Figure 8). See Figure 11.
2)Swivel the camera on the ball and socket bolt to adjust the camera angle. See Figure 13.
3)Turn the wing nut clockwise to tighten it and secure the camera position. See Figure 14.
Figure 13. Adjusting the angle of the camera with the ball and socket bolt
Figure 14. Tightening the wing nut to secure the camera position
12 | 1041075C / November 2003 |
