1-6 Section 1: Introduction

February 3, 2000 70055MP Revision D

Available Options

Available options for the LTC-MAP 2130 are listed in Table 1-1. Refer

to the applicable documentation for detailed information on the

available options.

Table 1-1: LTC-MAP 2130 Options

Option Part No. Description/Function
Magnetic Mount RTD
Temperature Sensor 30000MP Attaches magnetically to the transformer; has a built-in
4-20 ma transmitter.
Refer to Document No. 70063MP for more information.
RTD Transmitter T821028 Connects to an insertion-type temperature sensor and
transmits a 4-20 mA signal back to the monitor.
Refer to Document No. 70064MP for more information.
Clamp-On AC Current
(CT) Sensor T821026 Clips onto a transformer lead and detects load current.
Refer to Document No. 70059MP for more information.
Control Isolator 40041MP Optically isolates the monitoring system from the transformer
controls.
Refer to Document No. 70062MP for more information.
Combustible Gas Sensor 10384MP Measures hydrogen and hydrocarbon levels in the insulating
oil.
Moisture Sensor T801074 Measures moisture levels in the insulating oil.
Refer to Document No. 70065MP for more information.
Eight Line Phone
Multiplexer 40047MPA Allows up to eight monitors (with installed modems) to be
connected to a single phone line for data transmission.
Refer to Document No. 70061MP for more information.
Fifteen Line Phone
Multiplexer 40047MPB Allows up to fifteen monitors (with installed modems) to be
connected to a single phone line for data transmission.
Refer to Document No. 70061MP for more information.
14.4k bps Modem 20046MP Installed in the monitor; allows transfer of data and
configuration parameters over a telephone line to an off-site
PC.
Refer to Document No. 70058MP for more information.
SAGE Host Software
Package SAGE Provides tools for parameter configuration, parameter
calibration, data retrieval, and data analysis.
Refer to Document No. 70057MP for more information.