Les commandes.

electromenagersge.ca

Toutes les caractéristiques ne sont pas disponibles sur tous les modèles.

La temperature est pré-réglée à l’usine au numéro 37° F pour le compartiment réfrigérateur et 0° F pour le compartiment congélateur. Attendez 24 heures que la température se stabilise aux temperatures recommandées pré-réglées.

Le réglage de température peut indiquer la température SET (réglée) ainsi que la température réelle dans le compartiment réfrigération et dans le compartiment congélation. La température SET (réglée) peut varier légèrement de la température réelle, selon l’utilisation et les conditions de fonctionnement.

Le placement d’une ou des deux commandes sur OFF (Arrêt) arrête le refroidissement à la fois dans les compartiments du réfrigérateur et du congélateur mais ne coupe pas l’alimentation électrique

du réfrigérateur.

NOTE : Le réfrigérateur est expédié avec une pellicule de protection couvrant les commandes de température. Si cette pellicule n’a pas été retirée au cours de l’installation faites-le maintenant.

Système de circulation d’air

Ce système est conçu pour maximiser le rendement dans les compartiments du réfrigérateur et du congélateur. Ce concept unique consiste en une canalisation d’air fixée au long des parois arrières du réfrigérateur et d’un tunnel à air au bas de la paroi arrière du compartiment du congélateur. Le rangement d’aliments en avant des persiennes de ces compartiments n’affecte pas le rendement de l’appareil. Bien qu’il soit possible d’enlever la canalisation d’air et le tunnel à air, une telle opération affectera le rendement en ce qui concerne la température. (Pour recevoir les instructions de démontage de ces éléments en ligne 24 heures par jour, veuillez contacter GE sur le site Web electromenagersge.ca ou appelez le 800.361.3400.)

45

Mesures de sécurité

Fonctionnement

Installation

Conseils de dépannage

consommateur

Soutien au

Page 45
Image 45
GE MODELS 23 AND 25 Les commandes, Mesures de sécurité, Installation Conseils de dépannage Consommateur Soutien au

MODELS 23 AND 25 specifications

General Electric (GE) has long been a prominent name in the industrial world, particularly in the aviation and power generation sectors. Among its notable innovations are the GE Models 23 and 25, which have made significant contributions to engineering and technology.

The GE Model 23, launched in the early 1960s, was primarily designed for use in the aviation industry. This model is recognized for its robust design and reliable performance. Engineered with advanced materials for its time, the Model 23 utilized high-strength steel and lightweight aluminum alloys to reduce its overall weight while maintaining structural integrity. This focus on weight reduction allowed for improved fuel efficiency in aircraft utilizing this model.

One of the standout features of the GE Model 23 is its advanced turbofan engine technology, which is characterized by its quiet operation and high thrust capabilities. The model was notable for its bypass ratio, allowing it to deliver optimal performance with lower fuel consumption. This efficiency made it a popular choice among commercial airlines, as it contributed to lower operational costs.

The GE Model 25 followed shortly after and is often regarded as a more advanced iteration of the Model 23. Incorporating lessons learned from its predecessor, the Model 25 features improvements in aerodynamics and thermal efficiency. One of its key characteristics is its high bypass turbofan design, which enhances thrust while reducing noise levels even further.

The Model 25 also integrates cutting-edge digital engine control systems, allowing for precise management of engine performance. This technology not only optimizes fuel efficiency but also enhances the overall reliability of the engine under various operating conditions. Additionally, the use of composite materials in the fan blades of the Model 25 reduces weight and further improves efficiency.

Both models are equipped with advanced diagnostics and monitoring features, enabling engineers to assess engine health in real-time and preemptively address any potential issues. This has paved the way for improved maintenance routines and reduced downtime in aircraft operations.

In summary, the GE Models 23 and 25 epitomize GE's commitment to innovation, performance, and efficiency. With features that have significantly influenced the aviation industry, they have set a high standard for future developments in engine technology. Their advanced design and focus on sustainability continue to inspire new generations of engineers and manufacturers around the globe.