Safety Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

HOW TO CONNECT ELECTRICITY

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal safety, this appliance must be properly grounded.

Instructions Operating Instructions

The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

If the outlet is a standard 2-prong outlet, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

The refrigerator should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate.

This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.

Never unplug your refrigerator by pulling on the power cord. Always grip plug firmly and pull straight out from the outlet.

Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end.

When moving the refrigerator away from the wall, be careful not to roll over or damage the power cord.

Consumer Support Troubleshooting Tips Installation

READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.

SAVE THESE INSTRUCTIONS

4

Page 4
Image 4
GE MODELS 23 AND 25 installation instructions HOW to Connect Electricity

MODELS 23 AND 25 specifications

General Electric (GE) has long been a prominent name in the industrial world, particularly in the aviation and power generation sectors. Among its notable innovations are the GE Models 23 and 25, which have made significant contributions to engineering and technology.

The GE Model 23, launched in the early 1960s, was primarily designed for use in the aviation industry. This model is recognized for its robust design and reliable performance. Engineered with advanced materials for its time, the Model 23 utilized high-strength steel and lightweight aluminum alloys to reduce its overall weight while maintaining structural integrity. This focus on weight reduction allowed for improved fuel efficiency in aircraft utilizing this model.

One of the standout features of the GE Model 23 is its advanced turbofan engine technology, which is characterized by its quiet operation and high thrust capabilities. The model was notable for its bypass ratio, allowing it to deliver optimal performance with lower fuel consumption. This efficiency made it a popular choice among commercial airlines, as it contributed to lower operational costs.

The GE Model 25 followed shortly after and is often regarded as a more advanced iteration of the Model 23. Incorporating lessons learned from its predecessor, the Model 25 features improvements in aerodynamics and thermal efficiency. One of its key characteristics is its high bypass turbofan design, which enhances thrust while reducing noise levels even further.

The Model 25 also integrates cutting-edge digital engine control systems, allowing for precise management of engine performance. This technology not only optimizes fuel efficiency but also enhances the overall reliability of the engine under various operating conditions. Additionally, the use of composite materials in the fan blades of the Model 25 reduces weight and further improves efficiency.

Both models are equipped with advanced diagnostics and monitoring features, enabling engineers to assess engine health in real-time and preemptively address any potential issues. This has paved the way for improved maintenance routines and reduced downtime in aircraft operations.

In summary, the GE Models 23 and 25 epitomize GE's commitment to innovation, performance, and efficiency. With features that have significantly influenced the aviation industry, they have set a high standard for future developments in engine technology. Their advanced design and focus on sustainability continue to inspire new generations of engineers and manufacturers around the globe.