About the ice and water dispenser. (on some models)

ge.com

On some models

 

Safety

To Use the Dispenser

Select CUBED ICE , CRUSHED ICE or WATER .

Press the glass gently against the top of the dispenser cradle.

The spill shelf is not self-draining. To reduce water spotting, the shelf and its grille should be cleaned regularly.

If no water is dispensed when the refrigerator is first installed, there may be air in the water line

Spill Shelfsystem. Press the dispenser arm for at least two minutes to remove trapped air from the water line and to fill the water system. To flush out impurities in the water line, throw away the first six glassfuls of water.

CAUTION: Never put fingers or any other objects into the ice crusher discharge opening.

Locking the Dispenser

Press the LOCK pad for 3 seconds to lock the dispenser and control panel. To unlock, press and hold the pad again for 3 seconds.

Dispenser Light

This pad turns the night light in the dispenser on and off. The light also comes on when the dispenser cradle is pressed. If this light burns out, it should be replaced with a 6 watt 12 V maximum bulb.

Quick Ice (on some models)

When you need ice in a hurry, press this pad to speed up ice production. This will increase ice production for the following

48 hours or until you press the pad again.

Door Alarm (on some models)

To set the alarm, press this pad until the indicator light comes on. This alarm will sound if either door is open for more than

3 minutes. The light goes out and the beeping stops when you close the door.

Instructions Operating Instructions Installation Instructions

Important Facts About Your Dispenser

■Do not add ice from trays or bags to the storage drawer. It may not crush or dispense well.

■Avoid overfilling glass with ice and use of narrow glasses. Backed-up ice can jam the chute or cause the door in the chute to freeze shut. If ice is blocking the chute, poke it through with a wooden spoon.

■Beverages and foods should not be quick-chilled in the ice storage drawer. Cans, bottles or food packages in the storage drawer may cause the icemaker or auger to jam.

■To keep dispensed ice from missing the glass, put the glass close to, but not touching, the dispenser opening.

■Some crushed ice may be dispensed even though you selected CUBED ICE. This happens occasionally when a few cubes accidentally get directed to the crusher.

■After crushed ice is dispensed, some water may drip from the chute.

■Sometimes a small mound of snow will form on the door in the ice chute. This condition is normal and usually occurs when you have dispensed crushed ice repeatedly. The snow will eventually evaporate.

13

Troubleshooting Tips Consumer Support

Page 12 Page 14
Page 13
Image 13
GE MODELS 23 AND 25 About the ice and water dispenser. on some models, To Use the Dispenser, Locking the Dispenser
Page 12 Page 14

MODELS 23 AND 25 specifications

General Electric (GE) has long been a prominent name in the industrial world, particularly in the aviation and power generation sectors. Among its notable innovations are the GE Models 23 and 25, which have made significant contributions to engineering and technology.

The GE Model 23, launched in the early 1960s, was primarily designed for use in the aviation industry. This model is recognized for its robust design and reliable performance. Engineered with advanced materials for its time, the Model 23 utilized high-strength steel and lightweight aluminum alloys to reduce its overall weight while maintaining structural integrity. This focus on weight reduction allowed for improved fuel efficiency in aircraft utilizing this model.

One of the standout features of the GE Model 23 is its advanced turbofan engine technology, which is characterized by its quiet operation and high thrust capabilities. The model was notable for its bypass ratio, allowing it to deliver optimal performance with lower fuel consumption. This efficiency made it a popular choice among commercial airlines, as it contributed to lower operational costs.

The GE Model 25 followed shortly after and is often regarded as a more advanced iteration of the Model 23. Incorporating lessons learned from its predecessor, the Model 25 features improvements in aerodynamics and thermal efficiency. One of its key characteristics is its high bypass turbofan design, which enhances thrust while reducing noise levels even further.

The Model 25 also integrates cutting-edge digital engine control systems, allowing for precise management of engine performance. This technology not only optimizes fuel efficiency but also enhances the overall reliability of the engine under various operating conditions. Additionally, the use of composite materials in the fan blades of the Model 25 reduces weight and further improves efficiency.

Both models are equipped with advanced diagnostics and monitoring features, enabling engineers to assess engine health in real-time and preemptively address any potential issues. This has paved the way for improved maintenance routines and reduced downtime in aircraft operations.

In summary, the GE Models 23 and 25 epitomize GE's commitment to innovation, performance, and efficiency. With features that have significantly influenced the aviation industry, they have set a high standard for future developments in engine technology. Their advanced design and focus on sustainability continue to inspire new generations of engineers and manufacturers around the globe.
Top Page Image Contents