Mesures de sécurité

MESURES DE SÉCURITÉ IMPORTANTES.

LISEZ D’ABORD TOUTES LES DIRECTIVES.

AVERTISSEMENT!

RACCORDEMENT ÉLECTRIQUE

Ne coupez ni retirez en aucun cas la troisième broche (mise à la terre) de la fiche du cordon d’alimentation. Pour votre sécurité, cet appareil doit être correctement mis à la terre.

Fonctionnement

Le cordon d’alimentation de cet appareil est muni d’une fiche à 3 broches (mise à la terre) qui se branche dans une prise murale ordinaire

à3 alvéoles (mise à la terre) pour réduire au minimum les risques de chocs électriques.

Faites examiner la prise de courant et le circuit par un électricien qualifié pour vous assurer que la prise est correctement mise à la terre.

Si la prise murale est du type standard à 2 alvéoles, il vous incombe de la faire remplacer par une prise à 3 alvéoles correctement mise à la terre.

Le réfrigérateur doit toujours être branché dans sa propre prise de courant, dont la tension nominale est identique à celle indiquée sur la plaque signalétique.

Cette précaution est recommandée pour garantir un rendement optimum et éviter une surcharge des circuits électriques de la résidence, ce qui pourrait créer un risque d’incendie par surchauffe des fils.

Ne débranchez jamais le réfrigérateur en tirant sur le cordon d’alimentation. Saisissez fermement la fiche du cordon et tirez droit pour la retirer de la prise.

Réparez ou remplacez immédiatement tout cordon effiloché ou endommagé. N’utilisez pas un cordon fendillé ou présentant des signes d’usure.

Lorsque vous déplacez votre réfrigérateur du mur, faites attention de ne pas le faire rouler sur le cordon d’alimentation afin de ne pas l’endommager.

Installation

Conseils de dépannage

Soutien au

consommateur

VEUILLEZ LIRE ET SUIVRE ATTENTIVEMENT CES MESURES DE SÉCURITÉ.

CONSERVEZ CES DIRECTIVES

44

Page 44
Image 44
GE MODELS 23 AND 25 Raccordement Électrique, Installation Conseils de dépannage Soutien au Consommateur

MODELS 23 AND 25 specifications

General Electric (GE) has long been a prominent name in the industrial world, particularly in the aviation and power generation sectors. Among its notable innovations are the GE Models 23 and 25, which have made significant contributions to engineering and technology.

The GE Model 23, launched in the early 1960s, was primarily designed for use in the aviation industry. This model is recognized for its robust design and reliable performance. Engineered with advanced materials for its time, the Model 23 utilized high-strength steel and lightweight aluminum alloys to reduce its overall weight while maintaining structural integrity. This focus on weight reduction allowed for improved fuel efficiency in aircraft utilizing this model.

One of the standout features of the GE Model 23 is its advanced turbofan engine technology, which is characterized by its quiet operation and high thrust capabilities. The model was notable for its bypass ratio, allowing it to deliver optimal performance with lower fuel consumption. This efficiency made it a popular choice among commercial airlines, as it contributed to lower operational costs.

The GE Model 25 followed shortly after and is often regarded as a more advanced iteration of the Model 23. Incorporating lessons learned from its predecessor, the Model 25 features improvements in aerodynamics and thermal efficiency. One of its key characteristics is its high bypass turbofan design, which enhances thrust while reducing noise levels even further.

The Model 25 also integrates cutting-edge digital engine control systems, allowing for precise management of engine performance. This technology not only optimizes fuel efficiency but also enhances the overall reliability of the engine under various operating conditions. Additionally, the use of composite materials in the fan blades of the Model 25 reduces weight and further improves efficiency.

Both models are equipped with advanced diagnostics and monitoring features, enabling engineers to assess engine health in real-time and preemptively address any potential issues. This has paved the way for improved maintenance routines and reduced downtime in aircraft operations.

In summary, the GE Models 23 and 25 epitomize GE's commitment to innovation, performance, and efficiency. With features that have significantly influenced the aviation industry, they have set a high standard for future developments in engine technology. Their advanced design and focus on sustainability continue to inspire new generations of engineers and manufacturers around the globe.