GE PBe manual

11

setting switches 5-8 on SW1. See SW1 switches 5 to 8 on page 21.

2.Connect the PBe to the network switch or hub using the supplied 4310-0040 Ethernet cable.

3.Connect the PBe to the DVR using the supplied 4310- 0034 cable. Plug one end into port 1 of the PBe and the other end into the RS-232/2 port of the DVR.

4.Program the DVR for the desired recording functions based upon the presence of transaction text. In addition, make sure the RS-232/2 port is set for a 57600 baud rate. See the DVR manual for more information.

5.Apply power to the PBe using the supplied power supply.