GE PBe manual Monitor Mode menu, Camera/terminal IP table

17

4.The camera/terminal will redisplay with the new information.

5.Pressing the enter key will terminate the camera/terminal IP set-up and return you to the previous menu.

Figure 9. The camera/terminal IP table

Option #3 lets you enable/disable the Use IP for Camera command. When set to Enabled the PBe will search the incoming UDP and TCP packets for a match of IP addresses. Depending on the Device setting the PBe will parse the data received in that packet and send it to the associated camera number.

The Monitor Mode menu

The fourth selection on the Main Menu is the Monitor Mode on/ off toggle. This selection will toggle between off and on when 4