GE PDW9900 Series, PDW8900 Series 3Selections continued, 4Enhancements, Safety Instructions

ge.com

3Selections (continued)

COOKWARE Heavy 8.9 gal., 80 min. (POTS & PANS) Medium 7.8 gal., 70 min.

Light 6.7 gal., 60 min.

This cycle is meant for heavily soiled dishes or cookware with dried-on or baked-on soils. This cycle may not remove burned-on foods. Everyday dishes are safe to be used in this cycle.

NORMAL WASH Heavy 7.8 gal., 75 min.

Medium 6.7 gal., 65 min.

Light 4.5 gal., 50 min.

This cycle is for medium/heavily soiled dishes and glassware.

SPEED CYCLE 6.7 gal., 35 min.

This cycle is for everyday dishes and glassware.

CHINA CRYSTAL 6.7 gal., 35 min.

This cycle is for lightly soiled china and crystal.

PLASTICS CYCLE Heavy 6.7 gal., 115 min.

Medium 5.6 gal., 105 min.

Light 4.5 gal., 85 min.

The longer time for this cycle includes a built-in drying portion that is specifically designed to reduce the risk of melting plastic items and improve plastic drying. For removing red tomato-based stains, GE recommends the use of Cascade® Plastic Booster™.

SINGLE RACK WASH Heavy 6.1 gal., 45 min. (on upper rack only) Medium 5.1 gal., 35 min.

Light 4.1 gal., 30 min.

This cycle washes lightly soiled dishes on the upper rack only.

RINSE ONLY 2.3 gal., 10 min.

For rinsing partial loads that will be washed later. Do not use detergent with this cycle.

NOTE: On the PDW8900 Series models, the CHINA CRYSTAL/PLASTICS selector is a toggle pad; toggle the pad until the desired cycle is indicated.

NOTE: This dishwasher is equipped with a CleanSensor™ with automatic temperature control; therefore, cycle length and time may vary depending on soil and temperature conditions.

NOTE: Only the Anti-Bacteria cycle has been designed to meet the requirements of Section 6, NSF 184 for soil removal and sanitization efficacy.

4Enhancements

The light above the selected pad will be ON to indicate which ENHANCEMENT has been selected.

DELAY HOURS You can delay the start of a wash cycle for up to 24 hours (depending on model). Press the DELAY START pad to choose the number of hours you want to delay the start of the cycle; then press START/RESET.

After closing the door, the machine will count down and automatically start at the correct time.

NOTE: To cancel the DELAY START selection before the cycle begins, press the DELAY START pad until the display shows the estimated cycle time for the selected cycle in minutes.

5

Safety Instructions

Operating Instructions

Troubleshooting Tips

Consumer Support