GE PP945, PP975 Single Surface Element, Dual Surface Element, Tri-Ring Surface Element, On/Off

ON/OFF

Single Surface Element

To turn on a single surface element:

Touch the ON/OFF pad, then touch the (+)/(-)pad.

Use the (+)/(-)pad to choose the desired power setting. The control will beep each time a pad is touched.

To turn off a single surface element, touch the ON/OFF pad again.

ON/OFF

Dual Surface Element

To turn on the surface elements:

Touch the dual surface element ON/OFF pad, then touch the (+)/(-)pad.

Use the (+)/(-)pad to set the desired power setting.

Touch the pad once to alternate between large and small settings.

When the indicator light next to the pad is on, the large surface element is on. When it is off, the small surface element is on.

To turn the dual surface element off, touch the ON/OFF pad.

ON/OFF

Tri-Ring Surface Element

To turn on the surface elements:

Touch the Tri-Ring surface element ON/OFF pad, then touch the (+)/(-)pad.

Use the (+)/(-)pad to set the desired power setting.

Touch the pad to alternate between 12 in., 9 in. and 6 in. settings.

When one of the three surface elements is on, the corresponding indicator light next to the pad will be lit.

To turn the Tri-Ring surface element off, touch the ON/OFF pad.

– 10 –

(Continued next page)