GE PP975, PP945 Warming Zone Surface Element on some models, Error During Operation, Control Lock

Using the surface elements.

Warming Zone Surface Element (on some models)

ON/OFF

To turn on the warming zone surface element:

Use only cookware recommended for top-of-range cooking.

Touch the warming zone ON/OFF pad, then touch the (+)/(-)pad.

Use the (+)/(-)pad to choose a setting of H (High) or L (Low).

To turn off the warming zone surface element, touch the ON/OFF pad.

The WARMING ZONE will keep hot, cooked food at serving temperature. Always start with hot food. Do not use to heat cold food. Placing uncooked or cold food on the warming zone could result in foodborne illness.

For best results, all food on the

Error During Operation

If an error occurs in the control operation, the cooktop operation will discontinue and the unit will shut down completely.

To correct:

Attempt to set the control to the desired cooking setting.

Allow the cooktop to cool completely.

After the cooktop cools, attempt to set the control to the desired cooking setting.

If the cooktop will not operate, turn off the cooktop power at the circuit breaker or fuse box for one minute.

After one minute, turn on the cooktop power at the breaker and again attempt to set the control to the desired cooking setting.

If the cooktop fails to operate, call for service.

CONTROL LOCK

Error During Operation

How to Lock the Cooktop

If an error occurs in the control IMPORTANT: As a convenience, you operation, the cooktop operation will can lock the entire cooktop at any time discontinue and the unit will shut when it is not in use or before cleaning. down completely.

Locking the cooktop will prevent surface elementsTo correct:from being turned on

accidentally.

Attempt to set the control to the To lockdesiredthe cooktop:cooking setting.

Touch and hold the CONTROL LOCK pad Allow the cooktop to cool

for 3 seconds. completely.

A three-beep signal will sound and After the cooktop cools, attempt to

the Control Lock light will turn on, set the control to the desired

cooking setting.

If the cooktop will not operate, turn indicating that the cooktop is locked.

off the cooktop power at the circuit If the cooktop is locked while the surface

breaker or fuse box for one minute. elements or timer are in use, they will

automaticallyAfter one turminute,off. turn on the

cooktop power at the breaker and

To unlock:

again attempt to set the control to

Touch and hold the CONTROL LOCK pad the desired cooking setting.

again for 3 seconds.

If the cooktop fails to operate, call A three-beep signal will sound, and the

for service.

Control Lock light will go out, indicating that the cooktop is unlocked.

– 11 –

(Continued next page)