GE PP975, PP945 manual Dimensions and Clearances, Overall Cooktop Dimensions - 36-in. Models

Dimensions and Clearances

The following MINIMUM clearance dimensions must be maintained.

There must be 5 inches minimum vertical clearance between the cooktop bottom and any combustible surfaces.

13″ MAX. Depth of uprotected overhead cabinets

30″ MIN. Clearance from countertop to unprotected overhead surface

2″ MIN. Clearance from cutout to side wall on the right of the unit

15″ MIN. Height from countertop to nearest cabinet on either side of unit

5″ Min.

Vertical Clearance

2″ MIN. Clearance from cutout to side wall on the left of the unit

If a 30-inch clearance between the cooking surface and overhead combustible materials or metal cabinets cannot be maintained, a minimum clearance of 24 inches is required and the underside of the cabinets above the cooktop must be protected with not less than ¼-in. insulating millboard covered with sheet metal not less than 0.0122 inches thick.

Overall Cooktop Dimensions - 36-in. Models

			20-7/8″(21″ SS)
36″			Depth on Monogram ZEU36K
			is 21-1/4″@ center.
(36-1/8″SS)
				3-1/4″Front
	Cooktop			4-5/8″Rear
				at the conduit
				location
				6-1/4″Rear
		33-3/4″
18-7/8″
				on Model PP975
				& PP980

Overall Cooktop Dimensions - 30-in. Models

29-3/4″
			21-3/8″(21-1/2″SS)
(29-7/8″SS)
				3-1/4″Front
				4-5/8″Rear
	Cooktop
				at the conduit
				location
				6-1/4″Rear
		33-3/4″
18-7/8″
				on Model PP945
				& PP950

Make sure the wall coverings, countertop and cabinets around the cooktop can withstand heat up to 200°F (93°C) generated by the cooktop.

W all covering, cabinets and countertop must withstand heat up to 200° F ( 93° C ).

Note: The junction box must be located where it will allow considerable slack in the conduit for serviceability.

16″ Min.

Install junction box so that it can be reached through the front of the cabinet.

– 7 –