SafetyInstructions
Preparing to install the refrigerator.
Read these instructions completely and carefully.
OperatingInstructions
Stabilizing Brake
This refrigerator is equipped with a leveling foot which serves as a stabilizing brake. This additional leveling foot will hold the refrigerator securely in position during operation and cleaning.
To set the brake, first remove the base grille and hinge cover. Second, adjust the rollers to the desired position. Then turn the stabilizing brake until the brake is firmly in place against the floor.
After the brake is securely in place, unscrew the roller adjustment bolt counterclockwise until the weight of the refrigerator is supported by the stabilizing brake. This allows the weight to be positioned on the stabilizing brake.
Reinstall the hinge cover and replace the base grille.
Reverse the procedure to roll the refrigerator out.
Roller Adjustment Screw (3/8″ hex with slot)
Bottom Hinge Cover
Roller
Stabilizing Brake
CAUTION: To avoid possible personal injury or property damage the stabilizing brake must be firmly touching the floor.
Reversing the door swing.
Read these instructions completely and carefully.
Before You Begin
TroubleshootingTips
■Read the instructions all the way through before starting.
■Handle parts carefully to avoid scratching paint.
■Set screws down by their related parts to avoid using them in the wrong places.
■Provide a
IMPORTANT: Once you begin, do not move the cabinet until
These instructions are for changing the hinges from the right side to the left
CustomerService
Tools Required
■Phillips screwdriver | ■5/16″ hex socket driver |
■3/8″ socket and ratchet | |
■Masking tape | ■T15 Torx Driver |
12