GE TCX22 Reversing the Hardware, Transfer Bottom Hinge Bracket to the Left, CustomerService

TroubleshootingTips Installation Instructions OperatingInstructions SafetyInstructions

CustomerService

Reversing the door swing.

Read these instructions completely and carefully.

Reversing the Hardware

Transfer Bottom Hinge Bracket to the Left

a Remove the base grille by grasping it at both ends and pulling it straight out.

b Remove the bottom hinge bracket cover with a flat screwdriver.

Bottom Right

c Use the ratchet wrench and socket to remove the hex head screws and hinge bracket from the bottom right side of the cabinet. Replace the screws in the holes.

Bottom Right

d Remove the two outermost hex head screws from the bottom left side of the cabinet. Place the bottom hinge bracket over the holes and tighten with the screws.

Bottom Left

e Move the hinge pin with the washer to the hole that’s now on the outside.

NOTE: It is important that the washer is on the bottom of the hinge pin.

Washer

Bottom Left

14