References
Location of Controls
Back Panel
IN FROM | ||
ANT. | ||
OUT | VHF/UHF | |
MONO | ||
| ||
| OUT TO TV | |
IN 1 | 3 CH. 4 | |
|
3CH.4 Switch
Selects the channel to which you tune the TV to see the VCR picture if you connect the VCR using one of the basic hookups.
IN FROM ANT. (Antenna) Connector
VIDEO1 IN and AUDIO1 (R and L) IN Jacks
Receive signals from another component like a VCR or camcorder when it is connected to these jacks. Use INPUT (channel 00) on the remote to select.
Receives a signal from an antenna or cable system when attached.
OUT TO TV Connector
Passes signal to TV using the cable supplied.
VIDEO1 OUT and AUDIO1 (R and L) OUT Jacks
Send signals from VCR to another component like a TV, VCR or camcorder when it is connected to these jacks.
Display Panel
Power Indicator
VCR
Indicator Indicator
VCR Hi•Fi TIMER
A
M
Timer Indicator
Current Time, Channel Number, or Line Indicator (L), or Status
Lights when TAPE PLAYBACK feature is set to
POWER Indicator
Lights when the VCR is turned on.
Time, Channel Number, or Line Input (L)
The current time is displayed. Only the AM indicator appears; when the time is PM, no indicator appears.
The channel number or line input is displayed. Pressing INPUT or channel 0, 0 on the remote displays the line input indicator to record from the VIDEO1 and AUDIO1 IN jacks
STATUS Indicators
PLAY A tape is playing.
REC A tape is recording
REW A tape is rewinding.
FFA tape is fast forwarding. STOP A tape is stopped.
TIMER Indicator
Shows VCR is set for timer recording when VCR is turned off.
Flashes when a timer recording is set and there is no cassette in the VCR.
VCR Indicator
Lights when using the TV•VCR button.
When using one of the basic hookups:
•The picture is coming from the VCR when the VCR indicator is on.
•The picture is coming from the television channels when the VCR indicator is off.
28
