GE ZBD6700 Loading the Racks, Adjusting Upper Rack Height, Upper Wash Tower, Dishwasher

Loading the Racks

Dishwasher

Upper Rack

The upper rack is for glasses, cups, bowls and saucers. Cups and glasses fit best along the sides. This is also a secure place for dishwasher-safe plastics.

The cup shelf may be placed in the up or down position to add flexibility. The cup shelf can also secure wine glasses at an angle for best washability. Because wine glasses come in various sizes, after loading, slowly push in the rack to make sure they will clear the top of the dishwasher.

The upper rack is good for all kinds of oddly-shaped utensils. Saucepans, mixing bowls and other items should be placed face down.

Secure larger dishwasher-safe plastic items over two fingers when possible.

Fold-down tines (on some models) provide flexibility for extra-large and hard-to-fit items.

Make sure small plastic items are secure so they can’t fall onto the heating element.

Fold-down cup rack can support extra cup

Fold-down cup rack can support glass stems

Adjusting

Upper Rack

Height

The upper rack can be raised or lowered to provide extra room for different sized items. Empty the upper rack. Remove the rail pegs in the front of the rack runners by squeezing and lifting the top of the peg, then slide the rack out.

Lift peg from rack runner

Squeeze

Re-insert the rack in the chosen position and replace the pegs. Check that the spray arm is free to rotate.

Re-adjust upper rack

Upper

Wash

Tower

Take care not to obstruct the rotation of the spray arm under the upper rack or cover the water collector in the center of the upper rack.

18