You can locate your model number on the inside upper tub flange. Throughout this manual, features and appearance may var y from your model.
Control Panel — ZBD7000 & ZBD7100
Dishwasher
ZBD7000 & ZBD7100 |
|
|
|
1 | 2 | 3 | 4 |
Control Settings
1.Cycle
POTS & PANS | For |
| Everyday dishes may be included. This cycle may not remove |
|
|
NORMAL | For loads of everyday dishes, glasses and cookware with medium soils. |
WASH | NOTE: For heavily soiled dishes, choose NORMAL WASH plus HIGH water |
| temperature option. |
|
|
CHINA | For lightly soiled china and crystal, or recently used, lightly soiled dishes |
CRYSTAL | and glassware to be washed in a short time at moderate temperatures up to |
| 125°F (51°C). |
|
|
RINSE ONLY | For rinsing partial loads that will be washed later. Do not use detergent with |
| this cycle. |
2.WATER TEMP— This button provides extra heat options to increase water temperature for optimum performance.
NORMAL | This is the default |
| up to 131°F (55°C) in the NORMAL cycle and 145°F (63°C) in POTS & |
| PANS. |
|
|
HIGH | This water temp selection provides a wash and rinse with water temperatures |
| up to 135°F (57°C) in the NORMAL cycle and 155°F (68°C) POTS & PANS. |
|
|
SANITIZE | This water temp selection provides a sanitizing wash and rinse with water |
| temperatures up to 160°F (71°C) in the NORMAL cycle and 171°F (77°C) in |
| POTS & PANS. This selection cannot be used with RINSE ONLY or CHINA |
| CRYSTAL. At the end of the wash cycle, the SANITIZE OPTION light will |
| remain illuminated to indicate that the sanitization conditions have been met. |
|
| S | ID E N | T | I | NSF INTERNATIONAL |
|
|
|
| |||
| E |
|
| Meets NSF Protocol P153 Sanitization and Cleaning performance | ||
|
|
|
| A | ||
R |
|
|
| L | ||
|
|
|
| |||
|
|
|
|
| of household | |
|
|
|
|
|
|
3.SMART
SMART DRY is not available on RINSE ONLY.
14