GE ZET3038 Using the Self-Cleaning Oven, Before a clean cycle, How to set the oven for cleaning

Using the Self-Cleaning Oven

Trivection™ Wall Oven

Before a clean cycle

The oven door must be closed and all controls must be set correctly for the cycle to work properly.

We recommend venting your kitchen with an open window or using a ventilation fan or hood during the first self-clean cycle.

Remove the broiler pan, broiler grid, all cookware and any aluminum foil from the oven.

The oven racks and convection roasting rack can be self-cleaned, but they will darken, lose their luster and become hard to slide.

Do not use abrasives or oven cleaners. Clean the top, sides and outside of the oven door with soap and water.

Make sure the oven light bulb cover is in place and the oven light is off.

NOTE: See Cleaning the Oven Door in the Care and Cleaning section for instructions on how to clean the inner door outside the gasket. This area is not cleaned during the self-clean cycle.

IMPORTANT: The health of some birds is extremely sensitive to the fumes given off during the self-cleaning cycle of any oven.

Move birds to another well-ventilated room.

Wipe up heavy soil on the oven bottom.

(Appearance may vary.)

•On double oven models, you can set a clean cycle in both ovens. However, the last oven set will automatically delay its start until the end of the first oven’s clean cycle.

•On double oven models, you can use timed baking in one oven and self-clean the other at the same time.

How to set the oven for cleaning

1Select FEATURES.

2Select SELF CLEAN. Select upper or lower oven on double oven models.

3Select the desired self clean.

A 3-hour self-clean time is recommended when cleaning small, contained spills.

A self-clean time of 4 hours or longer is recommended for a dirtier oven.

LO (3 hrs) will self clean the oven for 3 hours. STD (4 hrs) will self clean the oven for 4 hours.

ADJUST TIME allows oven to be set for any time between 3 and 5 hours. Input the clean time (to nearest 5 minutes) using the number pads and select ENTER.

4Select START.

The door locks automatically. will flash until door is locked. The display will show the clean time remaining.

It will not be possible to open the oven door until the temperature drops below the lock temperature and the (LOCK) light goes off.

When the (LOCK) light goes off, you will be able to open the door.

•To stop a clean cycle, press the CLEAR/OFF pad. When the (LOCK) light goes off indicating the oven has cooled below the locking temperature, you will be able to open the door.

30