To set the clock
To set the timer
Clock, Timer and Control Lockout
|
| Trivection™ Wall Oven | |
|
|
| |
The clock must be set to the correct time of day | 1 | Select SETTINGS. | |
for the automatic oven timing functions to work | 2 | Select CLOCK. | |
properly. The time of day cannot be changed | |||
|
| ||
during timed baking, a | 3 | Press the number pads. | |
delayed start time. | 4 | Select ENTER. | |
|
The timer is an hour and minute timer only. The timer does not control oven operations. The maximum setting on the timer is 9 hours and 59 minutes. To set 10 minutes, enter 10. DO NOT ENTER 10:00!
1Press the TIMER ON/OFF pad.
2Press the number pads until the amount of time you want shows in the display. For example, to set 2 hours and 45 minutes, press 2, 4 and 5 in that order. If you make a mistake, press the TIMER ON/OFF pad and begin again.
3Select START.
After selecting START, SET disappears; this tells you the time is counting down, although the display does not change until one minute has passed. Seconds will not be shown in the display until the last minute is counting down.
4When the timer reaches :00, the control will beep 3 times followed by one beep every 6 seconds until the TIMER ON/OFF pad is pressed once.
To reset the timer
To cancel the timer
If the remaining time is not in the display (clock, | You may change it by pressing the TIMER |
delay start or cooking time are in the display), | ON/OFF pad, then press the number pads until |
recall the remaining time by pressing the TIMER | the time you want appears in the display. |
ON/OFF pad or using REVIEW TIMES. |
|
Press the TIMER ON/OFF pad twice.
Control lockout
Your control will allow you to lock out the touch pads so they cannot be activated when pressed.
NOTE: On double oven models, this activates this feature for both ovens.
To lock/unlock the controls:
1Press the 7 and 8 pads at the same time for 3 seconds, until the control screen shows
CONTROL IS LOCKED.
2To unlock the control, press the 7 and 8 pads at the same time for 3 seconds, until
CONTROL IS LOCKED disappears from the control screen and the main menu is displayed.
When this feature is on and the touch pads are pressed, the control will show CONTROL IS LOCKED.
•The control lockout mode affects all touch pads.
•The control will remain locked after a power failure.
12
