IMPORTANT SAFETY INSTRUCTIONS

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury or loss of life.

IMPORTANT SAFETY NOTICE

•The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to publish a list of substances known to the state to cause cancer, birth defects or other reproductive harm, and requires businesses to warn customers of potential exposure to such substances.

•The fiberglass insulation in self-cleaning ovens gives off a very small amount of carbon monoxide during the cleaning cycle. Exposure can be minimized by venting with an open window or using a ventilation fan or hood.

SAFETY PRECAUTIONS

When using your appliance, follow basic safety precautions, including the following:

• WARNING: Grounding Instructions:

This appliance must be connected to a grounded, metallic, permanent wiring system, or an equipment grounding conductor should be run with the circuit conductors and connected to the equipment grounding terminal or lead on the appliance.

• WARNING: To reduce the risk of burns, electric shock, fire, injury to persons or exposure to excessive microwave energy:

• Use this appliance only for its intended use

as described in this manual. Do not use corrosive chemicals or vapors in this appliance. This oven is specifically designed to heat or cook food, and is not intended for laboratory or industrial use.

 

• Be sure your appliance is properly installed

 

and grounded by a qualified technician in

 

accordance with the provided installation

 

instructions.

 

• Be sure the oven is securely installed in a

 

cabinet that is firmly attached to the house

 

structure. Never allow anyone to climb, sit,

 

stand or hang on the oven door.

 

• Have the installer show you the location of

 

the circuit breaker or fuse. Mark it for easy

 

reference.

 

• Do not attempt to repair or replace any part

 

of your wall oven unless it is specifically

 

recommended in this manual. All other

 

servicing should be referred to a qualified

 

technician.

 

• Teach children not to play with the controls

 

or any other part of the oven.

 

• Never leave the oven door open when you

4

are not watching the oven.

•Do not store this appliance outdoors. Do not use this product near water—for example, in a wet basement, or near a swimming pool.

•Do not cover or block any openings on the appliance.

•Always keep dish towels, dish cloths, pot holders and other linens a safe distance from your oven.

•For your safety, never use your appliance for warming or heating the room.

•Always keep wooden and plastic utensils and canned food a safe distance away from your oven.

•Keep the oven free from grease buildup.

•Always keep combustible wall coverings, curtains or drapes a safe distance from your oven.

•Do not let cooking grease or other flammable materials accumulate in or near the wall oven.

•Do not store or use combustible materials, gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

•Do not store flammable materials in an oven.

•Do not use water on grease fires. Never pick up a flaming pan. Turn the controls off.

Flame in the oven can be smothered completely by closing the oven door and turning the oven off or by using a multi-purpose dry chemical or foam-type fire extinguisher.

•Do not use aluminum foil to line oven bottoms. Improper installation of aluminum foil may result in a risk of electric shock or fire.

•Before performing any service, DISCONNECT THE OVEN POWER SUPPLY AT THE HOUSEHOLD DISTRIBUTION PANEL BY REMOVING THE FUSE OR SWITCHING OFF THE CIRCUIT BREAKER.

Page 3 Page 5
Page 4
Image 4
GE ZET3038, ZET3058 owner manual Use this appliance only for its intended use, Be sure your appliance is properly installed
Page 3 Page 5

ZET3058, ZET3038 specifications

General Electric (GE) has made significant strides in the power generation and industrial equipment sectors, and their models ZET3038, ZET3058, JT980, and JT930 are testament to this commitment to excellence. Each of these models offers a unique blend of features, technologies, and characteristics designed to meet the diverse needs of modern industries.

The GE ZET3038 is a robust turbine engine that excels in flexibility and efficiency. Its design incorporates advanced materials that enhance durability while minimizing weight. One of the outstanding features of the ZET3038 is its modular architecture, which allows for easy maintenance and upgrades. The engine is equipped with a state-of-the-art digital control system, providing real-time monitoring and optimization of performance. This capability reduces downtime and maximizes operational efficiency, making it an ideal choice for industries requiring reliable and consistent energy output.

Moving on to the GE ZET3058, this model builds on the strengths of the ZET3038 but offers enhanced power and efficiency. It features a larger turbine and advanced aerodynamic profiles, resulting in improved fuel efficiency and reduced emissions. The ZET3058 is known for its operational versatility, being suitable for both peaking and base-load operations. Its integrated diagnostic systems allow for predictive maintenance, which significantly extends the lifespan of the components and reduces overall operational costs.

The JT980 is one of GE's high-performance jet engines, designed primarily for commercial aviation. It boasts advanced combustion technologies that ensure lower NOx emissions, meeting stringent environmental regulations. The JT980 incorporates sophisticated electronic systems for enhanced fuel management and efficiency optimization, greatly improving operational economics for airlines. Its lightweight construction contributes to overall aircraft performance, enabling higher payload capacities and reduced fuel consumption.

Lastly, the JT930 engine is tailored for regional and business aviation markets. It features a compact design and employs the latest in materials technology to achieve a balance between performance and cost-efficiency. The JT930 is recognized for its quiet operation and low environmental impact, making it a favorable choice for operators concerned about sustainability. Its straightforward maintenance procedures ensure that aircraft downtime is kept to a minimum, allowing for more flights and increased revenue potential.

In summary, the GE ZET3038, ZET3058, JT980, and JT930 showcase a spectrum of innovative technologies and design philosophies aimed at delivering high performance, efficiency, and reliability across various applications. Each model reflects GE's commitment to advancing industrial capabilities through cutting-edge engineering solutions.
Top Page Image Contents