Uniden DECT 1811 manual To phone a stored number, Installing the Handset Batteries, To make a call

Models: DECT 1811

1 28
Download 28 pages 54.3 Kb
Page 4
Image 4

Charging the Battery

Installing the Handset Batteries

Press battery cover release.

Slide cover off.

Install the 3 rechargeable Ni-MH batteries.

- + -

Slide the battery cover back until it snaps into place

Place the handset on the base and charge uninterrupted for 14 hours.

Only use the battery pack supplied or rechargeable AAA Ni-MH Batteries.

DO NOT USE STANDARD BATTERIES.

Using the Phone

To make a call

1.Press talk [ ] and listen for the dial tone.

2.Dial phone number.

OR

1.Dial phone number

2.Press the talk [ ] key.

To hang up

Press talk [ ] or place the handset back on the base unit.

To answer a call

Handset on the base unit: Remove handset from the base and speak

Handset off the base unit: Pick up handset, press

the talk [ ] key and speak

To store a number:

in Standby Mode, enter the telephone number you wish to store and press [OK].

NAME? will be displayed.

enter the name of the person with this number in the same way that you entered the letters of your user name (page 17).

press [OK] key.

ADDRESS:XX will be displayed.

press [OK] key.

the phone number is now stored in the memory.

To phone a stored number:

press [OK] key to enter the phone book.

press [menu] to scroll through the names in your phone book.

when you reach the one you wish to call, press

talk [ ] and the number will be dialled automatically.

iii

Page 4
Image 4
Uniden DECT 1811 To phone a stored number, Installing the Handset Batteries, To make a call, To hang up, To answer a call