SUPER MICRO Computer P8SCI Installing DDR2 Memory, Memory Module Installation See Figure, Support

P8SC8/P8SCi User's Manual

2-4 Installing DDR2 Memory

CAUTION

Exercise extreme care when installing or removing memory

modules to prevent any possible damage.

Memory Module Installation (See Figure 2-2)

1.Insert each DDR2 memory module vertically into its slot. Pay attention to the notch along the bottom of the module to prevent inserting the module incorrectly. (See support information below.)

2.Gently press down on the memory module until it snaps into place.

Support

The P8SC8/P8SCi supports Dual channel, ECC/Non ECC, unbuffered DDR2 533/ 400 SDRAM. Both interleaved and non-interleaved memory are supported, so you may populate any number of DIMM slots. (Popu- lating DIMM#1A, DIMM#2A, and/or DIMM#1B, DIMM#2B with memory modules of the same size and of the same type will result in dual channel, two-way interleaved memory which is faster than single channel, non-interleaved memory.)

To Install:

Insert module vertically and press down until it snaps into place. Pay attention to the notch.

Figure 2-2. DDRII Installation

II

To Remove:	DDRII Slot
Use your thumbs
	(Top View)
gently to push
each release tab
outward to
release the DIMM
from the slot.
	2-6